Six Inspection Items You Need Pay Attention to About Slag Powder Silo

Six Inspection Items You Need Pay Attention to About Slag Powder Silo

In recent years, slag powder silo is more and more popular. With the continuous updating of technology and the continuous improvement of products, in the mineral powder industry, storage equipment is not stored in the open air, and environmental pollution can also be effectively controlled. Therefore, since the steel silo was established, it has been widely used in mineral powder industry. Then, after the mineral powder steel silo is put into use, regular maintenance and inspection are really necessary. Today, let's take a look at what aspects need to be paid attention to when checking slag powder silo?


1.Usually, pay attention to check whether the silo wall of the slag powder silo is deformed, and the connection of bolts on silo wall. If bolts are found fallen down, reinstall them in time.

2.During the inspection of slag powder silo, after silo powder is totally discharged out and the silo become empty, it is also necessary to pay attention to the sealing performance of the steel silo and whether the door frame and the adjacent steel plate are deformed or cracked. If such abnormal conditions are found, maintenance should be carried out in a timely manner.

3.Equipment inspection of slag powder silo. After the material is totally unloaded out from silo tanks, it is necessary to frequently check the connecting parts of hopper, welded parts, and the appearance of the hopper. If deformation or cracks are found, it is necessary to stop feeding in time to avoid more serious losses.

4.Regularly check the top of the slag powder silo every month, check whether the upper ring, process hole and other parts are normal, whether the bolts are loose, whether gaskets are damaged, if any problems are found, Please deal with it in time.

5.When inspecting a slag powder silo, we should also pay attention to check whether the appearance of the silo wall is corroded, and check the sealing condition of silo tanks. If a problem is found, take appropriate measures in time to deal with it.

6.Due to the alternating load used in the mineral powder steel silo, the welding seam of the silo body and the paint part should be checked every six months. If there is any problem with the welding on climbing ladders, corridors, or trestles, the deformed parts should be repaired and welded in time, and the rusted places should be treated with anti-corrosion in time so as to prevent rust from expanding.

The above is the place you need pay attention to during the inspection of slag powder silo. The daily inspection work is very important, and it is related to the quality of silo tanks and their service life. Therefore, the staff should pay attention to steel silo inspection work.

Comments

Post a Comment

Popular posts from this blog

Large-diameter Concrete Silo for Coal Storage

Image
During the coal washing process, in order to facilitate storage and transportation, various types of coal storage silos need to be built, including raw coal silos, clean coal silos, etc. In recent years, the environmental protection pressure on coal preparation plants has increased day by day. In the new development environment, large-diameter coal storage silos can not only significantly increase the capacity of   coal storage silos , but also have the advantages of good structural integrity, long application time, and low maintenance. This plays an important role in promoting the development of coal preparation plants. Concrete Silo Introduction Coal silos are silos used to store coal in industrial buildings such as cement, steel, and electricity. The  concrete silo  is a deep silo with a diameter of up to 25m and a simple silo capacity of 20,000 m3. It adopts a structural form supported by reinforced concrete walls and internal columns. The bottom of this silo is flat, because the s
Read more

Grain Storage Silo for Wheat Corn Maize Storage Silo System Solution

Image
Grain Storage Silo for Wheat Corn Maize Storage Silo System Solution Galvanized Steel Grain Silo For Rice Mill Plant I. Grain Storage Silo Introduction: We Sron Silo Engineer have been engaged in steel silo for more than ten years, and we have our own design team with more than 40 experienced staff, we also have our own installation team. Until now, we have designed and installed 30,000 ton cement silo in Indonesia, chicken feed line with hopper silo in Venezuela, 5000 ton grain silo in Cote d'Ivoire, 3000 ton wheat silo for milling plant in Mexico, etc. storage silo project in different countries.   Our bolted steel Silo is widely used for grains storage such as wheat, corn,rice, soybean, paddy, soybean meal, barley, malt,sunflower seeds, rapeseeds, peanuts, flour and other powder materials, oat, special grain and seeds etc. II. Sron Storage Silo Cases: We have made a lot of Storage Silo Project, include Grain Silo and Cement Silo, Clinker Silo in More than 30 Cou
Read more

Steel Silo - Best Way for Paddy Rice Storage

Image
Introduction of Paddy Rice Paddy rice is the most important and oldest food in Oryza genus. It can be ground into white rice for human consumption, and can also be used to make wine, or made into rice flour, rice bran, radish cake and other foods. Paddy rice is the staple food of more than half of the world's population. Therefore, many food processing factories, grain reserves and breweries need to store a large amount of paddy rice for use. However, the storage of paddy rice needs to meet conditions such as dryness, low temperature, and airtightness, otherwise the paddy is easy to mold and deteriorate. How to store paddy rice safely has become a concern of many manufacturers. Precautions for Paddy Rice Storage In order to ensure the quality of paddy rice, the moisture of paddy rice should be controlled before storage, and the impurities in paddy should be removed. Ventilate and cool down in time after storing paddy rice into the silo to prevent condensation and insect damage. Moi
Read more