SRON Storage Silo System Solution

  In the daily production process, the silos are often used to store the cement. So how to operate the cement silo correctly? First, before using a cement silo, we need to carefully inspect all parts of the entire silo system. We should check the state of the feed inlet at the top of the material bin, whether the temperature measurement cable is fastened, etc., to ensure that the results of the inspection meet the safety requirements. When we load the silos, we load it in batches. After each stage of material loading into the silo, it has to stand for a period of time, and then the next stage of feeding work. When we feed into the silo, we must make sure to close the valve at the bottom of the warehouse, open the valve at the top of the warehouse, and then start the feeding equipment. Materials enter the silo vertically through the valve on the top of the warehouse to avoid material inclination and friction of the warehouse wall in the warehouse. During the use process, we should check

  Bolted steel silo is a kind of commonly used grain storage silo, but do you know how to maintain the silo after it is built to prolong its service life? First, you should comply with the following requirements: ►The steel silo shall meet the national quality standards and can be put into use only after the trial operation is qualified. ►The air tightness of the bolt ed  steel silo shall meet the national technical requirements. The joint of the warehouse wall is easy to leak, and good air tightness shall be ensured. ►It is not allowed to load too many particles to avoid blocking the ventilation hole on the top of the steel silo and the hole of the axial flow fan. When the grain height is higher than the silo door, it is not allowed to open the silo door. ►Although the grain is stacked in the center of the steel plate warehouse when entering the warehouse, the grain height should not be higher than the top column eave of the warehouse. The level gauge shall be used normally. ►The bol

In recent years, slag powder silo has become more and more popular. With the continuous updating of technology and the continuous improvement of products, in the mineral powder industry, the storage equipment is not stored in the open air, and environmental pollution can also be effectively controlled. Therefore, since its establishment, the steel plate silo has been widely used in the mineral powder industry. After the ore powder steel plate silo is put into use, it really needs regular maintenance and inspection. Today, let's take a look at what should be paid attention to when checking the slag powder silo? 1.  At ordinary times, pay attention to check whether the silo wall of the slag powder silo is deformed and whether the bolts on the silo wall are connected. If the bolt is found to fall off, it shall be reinstalled in time. 2. During the inspection of slag powder silo, after the silo powder is completely discharged and the silo is empty, pay attention to the tightness of st